Forward Sensor Removal and Installation: Installation

CAUTION: Proper operation of forward sensor requires sensor be rigidly attached to vehicle structure and that the arrow on sensor bracket be pointing toward the front of the vehicle.

Check that none of the following faulty conditions exists.
- Bend, deformity or rust of front panel.
- Foreign matter on mating surface of sensor.
Apply thread lock cement to mounting bolts thread. Install forward sensor (1) on front panel and tighten mounting bolt (2) to specified torque.
"A": Thread lock cement 99000-32100

Tightening torque

Forward sensor mounting bolt (a): 9 N.m (0.9 kg-m, 6.5 lb-ft)

Fig 1: Installing Forward Sensor On Front Panel
Courtesy of SUZUKI OF AMERICA CORP.
Connect forward sensor connector by pushing connector till click is heard from it.
Connect negative cable at battery.
Enable air bag system referring to "ENABLING AIR BAG SYSTEM :".