Differential Disassembly and Assembly: Disassembly

1. Using special tool, remove right bearing (1) and sensor rotor (2).

   Special tool 

   (A): 09913--60910 

   (B): 09925--88210 

   Fig 1: Removing Right Bearing And Sensor Rotor

   Courtesy of SUZUKI OF AMERICA CORP.
2. Remove left bearing in the same manner at step 1).
3. Support differential case with soft jawed vise and remove final gear bolts then take out final gear.
4. Using special tool and hammer, drive out differential pinion shaft pin, and then disassemble components parts.

Special tool 

(A): 09922--85811 

Fig 2: Removing Differential Pinion Shaft Pin

Courtesy of SUZUKI OF AMERICA CORP.