Rear Door Glass Removal and Installation: Installation

Reverse removal procedure noting the following instructions.

• If there is deformity for glass run, replace new one.
• Tighten door glass front mounting screw (2) first, and then tighten door glass rear mounting screw (1).
  Fig 1: Tightening Door Glass Front Mounting Screw

  Courtesy of SUZUKI OF AMERICA CORP.
• Tighten rear door rear sash lower mounting bolt (1), and tighten rear door rear sash upper mounting screws (2, 3) as specified torque. Tightening order: (1) -> (2) -> (3)

  Tightening torque 

  Rear door rear sash upper mounting screw ((a)): 

  2.5 N.m (0.25 kg-m, 1.8 lb-ft) 

  Fig 2: Tightening Rear Door Rear Sash Upper Mounting Screw

  Courtesy of SUZUKI OF AMERICA CORP.
• Secure door sealing cover (1) with adhesive (2).
  Fig 3: Securing Door Sealing Cover With Adhesive

  Courtesy of SUZUKI OF AMERICA CORP.
• Tighten rear door outer weather-strip mounting screw to specified torque.

  Tightening torque 

  Rear door outer weather-strip mounting screw 

  ((a)): 1.5 N.m (0.15 kg-m, 1.0 lb-ft) 

Fig 4: Tightening Rear Door Outer Weather-Strip Mounting Screw

Courtesy of SUZUKI OF AMERICA CORP.