Passenger Air Bag (Inflator) Module Removal and Installation: Removal

Disable air bag system. Refer to "DISABLING AIR BAG SYSTEM :".
Remove blower unit and fresh air inlet duct referring to BLOWER UNIT REMOVAL AND INSTALLATION .
Disconnect passenger air bag (inflator) module connectors (1) as shown in the figure.
1. Unlock lock button (2).
2. With lock button unlocked, disconnect connector.
Fig 1: Unlocking Lock Button
Courtesy of SUZUKI OF AMERICA CORP.
Remove passenger air bag (inflator) module attaching bolts (1) and screws (2).

Fig 2: Removing Passenger Air Bag Module Attaching Bolts And Screws
Courtesy of SUZUKI OF AMERICA CORP.
Remove passenger air bag (inflator) module claw (1) from instrument panel (2).
Remove passenger air bag (inflator) module from vehicle.

WARNING:

When carrying a live air bag (inflator) module, make sure the bag opening is pointed away from you.
Never carry air bag (inflator) module by wires or connector on the side of the module. In case of an accidental deployment, the bag will then deploy with minimal chance of injury.
As the live passenger air bag (inflator) module must be kept with its bag (trim cover) facing up while being stored or left standing, place it on the workbench with a slit facing down or use the workbench vise to hold it securely at its lower mounting bracket. This is necessary so that a free space is provided to allow the air bag to expand in the unlikely event of accidental deployment.
Observe "Precautions on Handling and Storage of Air Bag System Components: " for handling and storing it.

Otherwise, personal injury may result.