Diagnostic Trouble Codes Troubleshooting
DTC TROUBLESHOOTING
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go To Step 2. | Go to "ENGINE AND EMISSION CONTROL SYSTEM CHECK :". |
| 2 |
|
Poor "C46-27" connection or intermittent trouble. Check for intermittent referring to "INTERMITTENT AND POOR CONNECTION INSPECTION ." If wire and connections are OK, substitute a known-good ECM and recheck. |
Go To Step 3. |
| 3 | Starter signal circuit check
Is resistance less than 100 Ω? |
Substitute a known-good ECM and recheck. | Open or high resistance wire in "BLK/YEL" circuit. |