LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Aerio S, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Repair Instructions >> Generator Drive Belt Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Generator Drive Belt Removal and Installation: Installation

  1. Loosen tensioner by turning the tensioner pulley clockwise.
  2. While holding the tensioner, install belt.
    NOTE: Make sure that the belt fits each pulley's groove properly.
    Fig 1: Installing Generator Drive Belt
    G04014340Courtesy of SUZUKI OF AMERICA CORP.
  3. Check belt tension referring to "GENERATOR DRIVE BELT INSPECTION :".
  4. Install engine under cover.
  5. Connect negative cable at battery.
scientia non olet · About LEMON Manuals