Rear Door Glass Removal and Installation: Removal

Remove inside handle bezel (1).
Remove inside door grip cover (2), and then remove door trim mounting bolts (3).

Fig 1: Removing Inside Door Grip Cover
Courtesy of SUZUKI OF AMERICA CORP.
Detach door trim mounting clips.
Remove door trim (1).
With inside handle bezel (2) tilted toward inside, turn and remove door trim as shown.

And disconnect power window switch lead wire at coupler.

Fig 2: Removing Door Trim
Courtesy of SUZUKI OF AMERICA CORP.
Remove door sealing cover (1).

Fig 3: Removing Door Sealing Cover
Courtesy of SUZUKI OF AMERICA CORP.
Remove outer weather-strip (1). Do not deform it when removal.

Fig 4: Removing Outer Weather-Strip
Courtesy of SUZUKI OF AMERICA CORP.
Loosen door glass mounting screws (1), and then drop door glass (2) from window regulator (3).
Detach rear part of glass run from sash (4), and remove sash by removing 2 screws (5) and bolt (6).
Remove door glass (2).

Fig 5: Removing Screws And Bolt

Courtesy of SUZUKI OF AMERICA CORP.