Transaxle Rear Cover Disassembly and Reassembly: Reassembly

Apply A/T fluid to new O-ring and install O-ring (1) to forward clutch accumulator piston (2).
Press forward clutch accumulator piston (2) into transaxle rear cover.
NOTE: Do not twist or deviate O-rings during installation.
Install forward clutch accumulator spring (3) and forward clutch accumulator cover (4) with 2 bolts.
Tightening torque

Forward clutch accumulator bolts (a): 10 N.m (1.0kg-m, 7.5 lb-ft)

Fig 1: Installing Forward Clutch Accumulator Spring And Forward Clutch Accumulator Cover
Courtesy of SUZUKI OF AMERICA CORP.
Apply A/T fluid to new oil seal rings and install oil seal rings (1) to transaxle rear cover (2).

NOTE:

Do not spread oil seal ring ends excessively.
Make sure that opening ends of oil seal rings are not lined up so as to prevent fluid leakage.

Fig 2: Installing Oil Seal Rings To Transaxle Rear Cover

Courtesy of SUZUKI OF AMERICA CORP.