LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Aerio S, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnostic Information and Procedures >> Diagnostic Trouble Codes Check >> Reading Diagnostic Trouble Codes from TCM Using SUZUKI Scan Tool - Method-2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reading Diagnostic Trouble Codes from TCM Using SUZUKI Scan Tool - Method-2

  1. Turn ignition switch OFF.
  2. Connect SUZUKI scan tool to data link connector (DLC) (1) located in underside of instrument panel at driver's seat side.

    Special tool 

    (A): SUZUKI scan tool 

    Fig 1: Connecting Suzuki Scan Tool To Data Link Connector (DLC)
    G04014941Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn ignition switch ON.
  4. Read DTC according to instructions displayed on SUZUKI scan tool and print it down. Refer to SUZUKI scan tool operator's manual for further details.
  5. After completing DTC check, turn ignition switch OFF and disconnect SUZUKI scan tool from data link connector (DLC) (1).
scientia non olet · About LEMON Manuals