Removal and Installation: Installation

Install hydraulic unit / control module assembly by reversing removal procedure.
Tightening torque

Brake pipe flare nut (a): 16 N.m (1.6 kg-m, 11.5 lb-ft)

ABS hydraulic unit / control module assembly bolt (b): 9 N.m (0.9 kg-m, 6.5 lb-ft)

ABS hydraulic unit / control module assembly bracket bolt (c): 23 N-m (2.3 kg-m, 16.5 lb-ft)

Fig 1: Installing Hydraulic Unit / Control Module Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Bleed air from brake system referring to AIR BLEEDING OF BRAKE SYSTEM .
Check each installed part for fluid leakage and perform "ABS HYDRAULIC UNIT OPERATION CHECK :".

NOTE: For new ABS hydraulic unit / control module assembly, if "ABS Hydraulic Unit Operation Check: "procedure has not been performed, ABS warning lamp may flash when ignition switch is turned ON position.
Accordingly preform "ABS HYDRAULIC UNIT OPERATION CHECK : " to stop flashing of ABS warning lamp.