Inspection and Repair Required after Accident: Notes
CAUTION:
- All air bag system components, including the electrical harness (component mounting points), must be inspected after an accident. If any components are damaged or bent, they must be replaced even if air bag system activation did not occur.
- Never use air bag system parts from another vehicle.
- Do not attempt to service the parts below. Service of these parts is by replacement only.
- Driver / Passenger air bag (inflator) modules
- Driver / Passenger side air bag (inflator) modules
- Driver / Passenger seat belt pretensioners
- Forward sensors
- Side sensors
- SDM
- Contact coil and combination switch assembly
- Air bag wire harness in main harness, instrument panel harness, floor harness and seat harness.
- OCM
- Front passenger seat adjuster with weight sensor.
- Driver seat position sensor
- Driver / passenger seatbelt buckle sensor
- Proper operation of the sensors and air bag system requires that any repairs to the vehicle structure return it to its original production configuration.
CAUTION:
After detecting one time of such collision as to meet deployment conditions, the SDM must not be used.
Refer to "AIR BAG DIAGNOSTIC SYSTEM CHECK : " when checking the SDM.
Refer to "AIR BAG DIAGNOSTIC SYSTEM CHECK : " when checking the SDM.