Visual Inspection

Visually check the following parts and systems.

VISUAL INSPECTION

Inspection item	Referring section
Engine oil - level, leakage	ENGINE OIL AND FILTER CHANGE
Engine coolant - level, leakage	Check Cooling System, Hoses and Connections in ENGINE COOLING SYSTEM
Fuel - level, leakage	FUEL TANK, CAP GASKET AND FUEL LINES INSPECTION
A/T fluid - level, leakage	AUTOMATIC TRANSAXLE FLUID INSPECTION
Air cleaner element - dirt, clogging	AIR CLEANER FILTER INSPECTION
Battery - indicator condition, corrosion of terminal	BATTERY INSPECTION
Accessory drive belt - tension damage	DRIVE BELT INSPECTION
Throttle cable - play, installation	ACCELERATOR CABLE ADJUSTMENT
Vacuum hoses of air intake system - disconnection, looseness, deterioration, bend
Connectors of electric wire harness - disconnection, friction
Fuses - burning
Parts - installation, bolt - looseness
Parts - deformation
Other parts that can be checked visually
Also check the following items at engine start, if possible
Malfunction indicator lamp - Operation	"MALFUNCTION INDICATOR LAMP (MIL) CHECK :"
Charge warning lamp - Operation	GENERATOR INSPECTION
Engine oil pressure warning lamp - Operation	OIL PRESSURE WARNING LIGHT SYMPTOM DIAGNOSIS
Engine coolant temp, meter - Operation	ENGINE COOLANT TEMPERATURE (ECT) SENSOR INSPECTION
Fuel level meter - Operation	FUEL LEVEL SENSOR INSPECTION
Tachometer - Operation
Abnormal air being inhaled from air intake system
Exhaust system - leakage of exhaust gas, noise
Other parts that can be checked visually