Diagnostic Trouble Codes Troubleshooting
WARNING:
In order to reduce risk of fire and personal injury, this work must be performed in a well ventilated area and away from any open flames such as gas hot water.
DTC TROUBLESHOOTING
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go To Step 2. | Go to "ENGINE AND EMISSION CONTROL SYSTEM CHECK :". |
| 2 | Check EVAP canister purge power supply circuit
Is it voltage 0 V? |
Go To Step 3. | "BLU/BLK" wire shorted to power supply circuit. |
| 3 | Check EVAP canister purge valve
Is it good condition? |
Go To Step 4. | Faulty EVAP canister purge control valve. |
| 4 | Check EVAP canister purge control circuit
Is resistance above 30 Ω at 20°C, 68°F? |
Intermittent trouble. Check for intermittent referring to "INTERMITTENT AND POOR CONNECTION INSPECTION ." If OK, substitute a known-good ECM recheck. |
Shorted circuit between "BLK/RED" and "BLU/ BLK" wire and faulty ECM. |