Clutch Pedal Position (CPP) Switch Circuit Check
CLUTCH PEDAL POSITION (CPP) SWITCH CIRCUIT CHECK CHART
| Step |
Action |
Yes |
No |
| 1 |
Clutch pedal position switch circuit check
- Disconnect connector from cruise control module with ignition switch OFF.
- Check for proper connection to cruise control module at terminal "E52-9".
- If OK, check for resistance between terminal "E52-9" and ground under each condition in the following.
Clutch pedal position switch circuit specification
Clutch pedal released: Infinity
Clutch pedal depressed: Continuity
Is check result satisfactory? |
Clutch pedal position switch circuit is OK. |
Go to Step 2. |
| 2 |
Clutch pedal position switch position check
- Check clutch pedal position switch for installation position referring to "CLUTCH PEDAL POSITION (CPP) SWITCH FOR CRUISE CONTROL REMOVAL AND INSTALLATION :".
Is check result satisfactory? |
Go to Step 3. |
Adjust CPP switch position. |
| 3 |
Clutch pedal position switch check
- Disconnect connector from clutch pedal position switch.
- Check for proper connection to clutch pedal position switch at all terminals.
- If OK, check clutch pedal position switch for operation referring to "CLUTCH PEDAL POSITION (CPP) SWITCH FOR CRUISE CONTROL INSPECTION :".
Is this switch in good condition? |
"BLU" or "BLK" circuit is open or short. |
Replace CPP switch. |