B1095

DTC B1095 (NO.1095): Wrong Side Sensor (Driver Side / Passenger Side) ID

DTC Will Set when
SDM receives wrong ID (Part No.) signal from side sensor.

DTC Troubleshooting
1. Turn ignition switch OFF.
2. Replace applicable side sensor.
3. Repeat Air Bag Diagnostic System Check.

NOTE: Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs.
- Repeat Air Bag Diagnostic System Check to confirm that the trouble has been corrected.