LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> XL-7 LX, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Overhaul - A/T) >> Repair Instructions >> Input Shaft Speed Sensor Removal and Installation >> Input Shaft Speed Sensor Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Shaft Speed Sensor Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative cable at battery.
  2. Hoist vehicle.
  3. Disconnect input shaft speed sensor connector.
  4. Check input shaft speed sensor (1) for resistance between terminals of sensor.

    Input shaft speed sensor resistance 

    1. Standard: 560 - 680 ohms (at 20 °C (68 °F))
Fig 1: Checking Input shaft Speed Sensor Resistance
G00761551Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals