HVAC Control Module Removal and Installation: Installation

Install in reverse order of removal procedure, noting the following item.
- When installing center garnish, align rubber bushing (1) with BCM installation hole (2) of instrument panel member (3).
  
  Fig 1: Installing Center Garnish
  Courtesy of SUZUKI OF AMERICA CORP.
- For vehicle with automatic A/C system, fit aspirator hose in inside air temperature sensor duct (1) of HVAC control module (2).
  
  Fig 2: Fitting Aspirator Hose Inside Air Temperature Sensor Duct
  Courtesy of SUZUKI OF AMERICA CORP.
- Enable air bag system.
  For H25 engine model, refer to AIR BAG RESTRAINT SYSTEMS .
  
  For H27 engine model, refer to AIR BAG RESTRAINT SYSTEMS .