LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> XL-7 EX, 4WD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belts >> Repair Instructions >> Retractor Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Retractor Assembly

  1. Let the seat belt retract fully to confirm its easy retraction.
    • The retractor assembly should lock webbing when pulled quickly.
    • The retractor assembly should lock webbing even when tilted (approx. 15°) toward the fore and aft or right and left directions.
  2. Check retractor assembly with seat belt pretensioner appearance visually for the following symptoms and if any one of them is applicable, replace it with a new one as an assembly.
    • Pretensioner has activated.
    • There is a crack in seat belt pretensioner (retractor assembly).
    • Wire harness or connector is damage.
    • Seat belt pretensioner (retractor assembly) is damaged or a strong impact (e.g., dropping) was applied to it.
scientia non olet · About LEMON Manuals