Front Fog Light Removal And Installation: Installation

Reverse removal procedure for installation nothing the following:

• After installing, adjust aiming with adjusting screw according to local regulation if obligated.
  Fig 1: Aiming Front Fog Light

  Courtesy of SUZUKI OF AMERICA CORP.
• Unless otherwise obligated by local regulations, check aiming adjusting screw height "a" before installing and adjust it if it is not specified height below.

  Aiming adjusting screw height 

  "a": 24.5 mm (0.964 in.)

Fig 2: Identifying Aiming Adjusting Screw Height "a"

Courtesy of SUZUKI OF AMERICA CORP.