Disabling & Activating Air Bag System
WARNING:
Accidental air bag deployment is possible. Personal injury may result. Read and follow all service precautions. See AIR BAG SAFETY PRECAUTIONS .
- Place front wheels in straight-ahead position. Turn ignition switch to LOCK position and remove ignition key. Remove AIR BAG fuse from AIR BAG fuse box, located under left side of instrument panel. Wait 10 seconds or longer.
- Disengage Connector Position Assurance (CPA) clip and disconnect Yellow driver-side air bag module connector. See Fig 1. Pull top of glove box outward while depressing stops. Allow glove box to fall toward passenger seat. Disengage CPA clip and disconnect Yellow connector for passenger-side air bag module. See Fig 2.
- To activate air bag system, turn ignition switch to LOCK position and remove key. Reconnect driver-side and passenger-side air bag module connectors. Install AIR BAG fuse. Go to SYSTEM OPERATION CHECK .