Diagnostic Procedure
- If air bag diagnostic system check has been performed, go to next step. If air bag diagnostic system check has not been performed, go to AIR BAG DIAGNOSTIC SYSTEM CHECK .
- Turn ignition switch to OFF position. If driver-side or passenger-side air bag module has not deployed, go to next step. If driver-side or passenger-side air bag module has deployed, perform inspections and repairs required following a collision. See POST-COLLISION INSPECTION .
- Inspect front of vehicle and undercarriage for signs of impact. If any sign of impact is present, go to POST-COLLISION INSPECTION . Go to next step. If no sign of impact is present, replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM) under REMOVAL & INSTALLATION. Go to next step.
- Reconnect all air bag system components. Using scan tool, clear all DTCs. Go to AIR BAG DIAGNOSTIC SYSTEM CHECK under DIAGNOSTICS.