Programming Transmitter Code
WARNING: This page is about a different car, the 2004 Suzuki XL-7, 2004 Suzuki Grand Vitara, 2003 Suzuki XL-7, and 2003 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- For transmitter codes can be registered at the same time.
- When fifth transmitter code is registered, the oldest one will be cleared.
- Register transmitter code(s) to be used in total four times to delete registered transmitter code(s).
If transmitter / door lock controller is replaced with new one or additional transmitter(s) is necessary, program transmitter code(s) as follows.
- Make sure that all doors are closed and ignition key is out of ignition key cylinder.
- Open driver side door.
- Turn ignition switch to ON position, and then remove ignition key from ignition key cylinder within 10 seconds after that.
- Push and release driver side door switch (1) at 3 times by hand within 20 seconds after removing ignition key from ignition key cylinder.
- Turn ignition switch to ON position, and then remove ignition key from ignition key cylinder within 10 seconds after that.
- Push "UNLOCK" button (2) on transmitter (3) and confirm that all doors are operated from lock to unlock. With this, code registration is completed.