LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Vitara RWD, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Repair Instructions >> Fuel Injector Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector Removal and Installation: Removal

  1. Relieve fuel pressure in fuel feed line referring to "FUEL PRESSURE RELIEF PROCEDURE:  ".
  2. Remove throttle body and intake collector referring to THROTTLE BODY REMOVAL AND INSTALLATION .
  3. Disconnect fuel feed hose (1) and fuel return hose (2).
  4. Disconnect vacuum hose (4) and fuel return hose from fuel pressure regulator (5).
  5. Remove fuel feed pipe (8) and fuel connect pipe (7) from delivery pipes (6) (right and left).
    CAUTION: A small amount of fuel may be released when it is from delivery pipe. Place a shop cloth under delivery pipe so that released fuel is absorbed in it.
  6. Disconnect connector (3) from each injector.
    Fig 1: Disconnecting Connector From Each Injector
    G02257008Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove delivery pipes (1) (right and left) from intake manifold.
    Fig 2: Removing Delivery Pipes From Intake Manifold
    G02257009Courtesy of SUZUKI OF AMERICA CORP.
  8. Remove fuel injector(s).
scientia non olet · About LEMON Manuals