Rear Wheel Speed Sensor Removal and Installation: Installation

Check that no foreign material is attached to sensor and rotor.
Install it by reversing removal procedure.
CAUTION: Do not pull wire harness or twist more than necessary when installing rear wheel speed sensor.

Tightening torque

Rear wheel speed sensor bolt (a): 21 N.m (2.1 kg-m, 15.5 lb-ft)

Fig 1: Tightening Bolt With Torque Specification
Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no clearance between sensor (1) and knuckle.

Fig 2: Checking Clearance Between Sensor And Knuckle
Courtesy of SUZUKI OF AMERICA CORP.