Steering Lock Assembly (Ignition Switch) Removal and Installation: Installation
- Position oblong hole of steering shaft (2) in the center of hole in steering column assembly (1).
Courtesy of SUZUKI OF AMERICA CORP.
- Turn ignition key to "ACC" or "ON" position and install steering lock assembly onto column.
- Now turn ignition key to "LOCK" position and pull it out.
- Align hub on lock with oblong hole of steering shaft and rotate shaft to assure that steering shaft is locked.
- Tighten new bolts until head of each bolt is broken off.
Courtesy of SUZUKI OF AMERICA CORP.
- Turn ignition key to "ACC" or "ON" position and check to be sure that steering shaft rotates smoothly. Also check for lock operation.
- Install steering column. Refer to STEERING COLUMN REMOVAL AND INSTALLATION:
.