LSPV Assembly Removal and Installation: Removal

1. Clean around reservoir cap and take out fluid with syringe or such.
2. Hoist vehicle.
3. Disconnect brake pipes (2) from LSPV assembly (1).
   Fig 1: Disconnecting Brake Pipes From LSPV Assembly

   Courtesy of SUZUKI OF AMERICA CORP.
4. Remove LSPV assembly (1) with spring (2) from vehicle body.
5. Remove spring (2) from lever (5).

CAUTION: LSPV assembly must not be disassembled. Replace with new one if defective.

Fig 2: Removing Spring From Lever

Courtesy of SUZUKI OF AMERICA CORP.