Radiator Removal and Installation: Removal

Disconnect negative cable at battery.
Drain cooling system by loosening drain plug (1) of radiator.

Fig 1: Loosening Drain Plug Of Radiator
Courtesy of SUZUKI OF AMERICA CORP.
When servicing vehicle equipped with A/T (Automatic Transmission), place oil pan under radiator (1) and disconnect A/T fluid hoses (inlet hose (Outlet from oil cooler) (2), outlet hose (Inlet to oil cooler) (3)) from radiator (1).

Fig 2: Disconnecting A/T Fluid Hoses And Outlet Hose From Radiator
Courtesy of SUZUKI OF AMERICA CORP.
Loosen cooling fan / clutch nuts (1).

Fig 3: Loosening Cooling Fan/Clutch Nuts
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect radiator inlet hose from radiator.
Remove P/S oil tank stay bolts (1) from radiator stay.

Fig 4: Removing P/S Oil Tank Stay Bolts From Radiator Stay
Courtesy of SUZUKI OF AMERICA CORP.
Remove radiator shroud securing clips.
Then remove cooling fan / clutch and radiator shroud.
Disconnect water hoses (inlet hoe (1), outlet hose (2)) and reservoir hose (3) from radiator (4).

Fig 5: Disconnecting Water Hoses And Reservoir Hose From Radiator
Courtesy of SUZUKI OF AMERICA CORP.
Remove radiator.