Rear Wheel Speed Sensor Removal and Installation: Removal
- Disconnect negative cable from battery.
- Hoist vehicle.
- Disconnect rear wheel speed sensor connector (2) and detach wire harness (1) from vehicle body and rear axle.
Courtesy of SUZUKI OF AMERICA CORP.
- Remove harness clamps (2) and sensor bolt (1) and remove rear wheel speed sensor from rear axle.
CAUTION:
- Do not pull wire harness when removing rear wheel speed sensor.
- Do not cause damage to surface of rear wheel speed sensor and do not allow dust, etc. to enter its installation hole.
Courtesy of SUZUKI OF AMERICA CORP.