Front Wheel Speed Sensor Removal and Installation: Installation

Check sensor rotor referring to "FRONT WHEEL SPEED SENSOR ROTOR ON-VEHICLE INSPECTION: ".
Install it by reversing removal procedure.
CAUTION:
- Do not pull wire harness or twist more than necessary when installing front wheel speed sensor.
- Fit harness grommet to inner fender securely.
Tightening torque

Wheel speed sensor clamp bolt (a): 10 N.m (1.0 kg-m, 7.5 lb-ft)

Front wheel speed sensor bolt (b): 23 N.m (2.3 kg-m, 17.0 lb-ft)

Fig 1: Tightening Bolt With Torque Specification
Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no clearance between sensor (1) and knuckle.

Fig 2: Checking Clearance Between Sensor And Knuckle

Courtesy of SUZUKI OF AMERICA CORP.