LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Verona S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Vehicle Service & Overhaul >> Repair Instructions >> Shift Control Cable Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Control Cable Installation

  1. Install the shift control cable into the fire wall of the vehicle.
  2. Install the shift control cable onto the transaxle mount.
    3. Fig 1: Installing Shift Control Cable Onto Transaxle Mount
    G01986365Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the shift control cable onto the shift control assembly.
  4. Tighten the nut on the cable bracket.
  5. Install the shift control cable adjuster pinch nut.
    1. Tighten the nut to 8 N.m (71 lb-in).
    6. Fig 2: Installing Shift Control Cable Adjuster Pinch Out
    G01986366Courtesy of SUZUKI OF AMERICA CORP.
  6. Install the clip to the shift control cable at the transaxle mount connection.
  7. Install the clip to the select lever connection on the transaxle case.
  8. Adjust the shift control cable. Refer to Transaxle Control Module (TCM) Removal  .
  9. Install the air filter housing assembly and bolts.
    1. Tighten the bolts to 10 N.m (89 lb-in).
  10. Connect the negative battery cable.
Fig 3: Connecting Negative Battery Cable
G01986367Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals