LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Verona S >> Repair and Diagnosis >> Body & Frame >> Power Seats >> Repair Instructions >> Front Seatback Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seatback Installation

  1. Install the seatback onto the seat cushion.
    CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  2. Install the front seatback bolts.
    1. Tighten the front seatback bolts to 45 N.m (33 lb-ft).
  3. Connect the electrical connectors.
    Fig 1: Installing Front Seatback Bolts
    G02996988Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the seat trims to its original position.
  5. Install the back panel onto the seat with the screws.
    1. Tighten the front seatback bolts to 45 N.m (33 lb-ft).
  6. Install the front bucket seat in the vehicle. Refer to Front Bucket Seat Installation (for Power Driver Seat)  .
Fig 2: Installing Back Panel Onto Seat With Screws
G02996989Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals