LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Verona S >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Column >> Repair Instructions >> Key Cylinder Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key Cylinder Installation

  1. Set the ignition key to ACC position.
  2. Install the key cylinder by pushing it into the key cylinder housing.
    3. Fig 1: Installing The Key Cylinder
    G01987187Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the steering column jacket assembly securing bolts and nuts.
    1. Tighten the steering column jacket assembly securing bolts and nuts to 22 N.m (16 lb-in).
    4. Fig 2: Installing Steering Column Jacket Assembly
    G01987188Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the instrument cluster trim panel. Refer to INSTRUMENT CLUSTER TRIM PANEL INSTALLATION .
  5. Install the instrument panel under cover. Refer to INSTRUMENT PANEL INSTALLATION .
  6. Install the knee bolster. Refer to DRIVER'S SIDE KNEE BOLSTER INSTALLATION .
    7. Fig 3: Installing The Knee Bolster
    G01987189Courtesy of SUZUKI OF AMERICA CORP.
  7. Install the audio system trim plate. Refer to INSTRUMENT CLUSTER TRIM PANEL INSTALLATION .
    8. Fig 4: Installing The Audio System Trim Plate
    G01987190Courtesy of SUZUKI OF AMERICA CORP.
  8. Install the upper and the lower steering column cover panel.
    1. Tighten the upper and the lower steering column cover panel screws to 2.5 N.m (22 lb-in).
  9. Connect the negative battery cable.
Fig 5: Tightening Upper & Lower Steering Column Cover Panel
G01987191Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals