Oil Pan: Removal
- Disconnect the negative battery cable.
- Raise and suitably support the vehicle.
- Remove the engine under cover.
- Place a fluid container below the fluid drain plug.
- Remove the transaxle fluid drain plug using the plug remover/installer and drain the transaxle fluid. See CHECKING FLUID LEVEL
. See Figure
.
- Remove the oil cooler inlet and outlet pipes. See Fig 1
. See OIL COOLER PIPES/HOSES
.
- Remove the oil pan and oil pan gasket. See Fig 2
.
Courtesy of SUZUKI OF AMERICA CORP.
Courtesy of SUZUKI OF AMERICA CORP.