LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Verona LX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Vehicle Service & Overhaul >> Repair Instructions >> Valve Body Disassembly and Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Valve Body Disassembly and Assembly

  1. Remove the oil pan bolts and oil pan.
  2. Remove the oil pan gasket.
    1. Tighten the oil pan bolts to 6 N.m (53 lb-in).
    3. Fig 1: Removing Oil Pan Gasket
    G01986435Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove valve body fixing bolts and transaxle input speed sensor bolt on the valve body.
  4. Remove the holder for the transaxle input speed sensor.

    Installation Notice 

    1. Tighten the bolts to 8 N.m (71 lb-in).
    5. Fig 2: Removing Holder For Transaxle Input Speed Sensor
    G01986436Courtesy of SUZUKI OF AMERICA CORP.
  5. Tilt the valve body.
  6. Remove the fastening screw for the output speed sensor under the valve body assembly.
  7. Lever the cable out of the retaining clip and pull out the output speed sensor.
  8. Installation should follow the removal procedure in the reverse order.
    1. Tighten the screw to 6 N.m (53 lb-in).
Fig 3: Installing Valve Body In Reverse Order
G01986437Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals