Brake F, Slotted Nut Disassembly and Assembly: Notes

Tools Required 

1. DW260-060 Brake F Split Stop Ring Remover

1. Remove the side shaft. Refer to Side Shaft Disassembly and Assembly  .
2. Take OFF the disc set and the brake F inner disc carrier.
Fig 1: Taking OFF Disc Setting & Brake F Inner Disc Carrier (1 Of 2)
Courtesy of SUZUKI OF AMERICA CORP.
Fig 2: Taking OFF Disc Setting & Brake F Inner Disc Carrier (2 Of 2)
Courtesy of SUZUKI OF AMERICA CORP.
3. Mount fixture and remove the brake F split stop ring.
4. Remove the fixture and take off the cup spring.
Fig 3: Removing Fixture & Taking Off Cup Spring
Courtesy of SUZUKI OF AMERICA CORP.
5. Release the piston F by applying compressed air to the bore.
Fig 4: Releasing Piston F Applying Compressed Air To Bore
Courtesy of SUZUKI OF AMERICA CORP.
6. Remove piston F and bearing plate with spur gear.
7. Installation should follow the removal procedure in the reverse order.