P/S Pump Assembly Removal
- Remove the serpentine accessory drive belt. Refer to Serpentine Accessory Drive Belt Removal
.
Courtesy of SUZUKI OF AMERICA CORP.
- Position a drain pan to catch the power steering fluid that will drain from the high-pressure hose after it is disconnected from the power steering pump.
- Disconnect the high-pressure hose and the supply hose from the power steering pump.
Courtesy of SUZUKI OF AMERICA CORP.
- Remove the bolt from the front right side of the power steering pump. Loosen the rear right bolt and swing the bracket out of the way.
Courtesy of SUZUKI OF AMERICA CORP.
- Remove the two long power steering pump bolts and remove the power steering pump from the vehicle.
Courtesy of SUZUKI OF AMERICA CORP.