Door Glass

Rear Door Glass Removal and Installation

Rear Door Glass Removal

1. Remove the door seal trim. Refer to Door Seal Trim Removal.
2. Remove the exterior B-pillar molding. Refer to B-Pillar Molding Removal.
3. Remove the screws that secure the glass to the window regulator.




4. Remove the glass from the door.

Rear Door Glass Installation

1. Install the glass in the door and position the glass within the window regulator.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

2. Install the glass screws.

Tighten:
Tighten the glass screws to 7 N.m (62 lb.in).

3. Install the exterior B-pillar molding. Refer to B-Pillar Molding Installation.




4. Install the door seal trim. Refer to Door Seal Trim Installation.