Rear

Rear Knuckle

Removal
1. Raise and suitably support the vehicle.
2. Remove the rear wheels.





3. Remove the upper arm nut-to-rear knuckle using KM507-B.
4. Remove the front, trailing and rear parallel link.
5. Remove the hub.
6. Remove the strut bolt-to-knuckle.





7. Remove the rear knuckle.


Installation
1. Install the hub into the rear knuckle.
2. Install the front and rear parallel link.





3. Install the upper arm nut-to-rear knuckle.
Tighten: Tighten the upper arm nut-to-rear knuckle to 110 Nm (81 ft. lbs.).