Power Steering Fluid Supply Hose Removal and Installation

Power Steering Fluid Supply Hose

Removal
1. Siphon the power steering fluid from the fluid reservoir.





2. Disconnect the fluid supply hose at the fluid reservoir lower connection.
3. Disconnect the fluid supply hose from the power steering pump inlet. Use a rag to avoid any spillage.





4. Remove the power steering fluid supply hose.


Installation
1. Install the power steering fluid supply hose.





2. Connect the fluid supply hose to the power steering pump inlet.
3. Connect the fluid supply hose to the fluid reservoir lower connection.
4. Fill the fluid reservoir with power steering fluid.

CAUTION: When adding fluid or making a complete change, always use DEXRON-II or III power steering fluid. Failure to use the proper fluid will cause hose and seal damage and fluid leaks.





5. Inspect for leaks. If there are leaks, correct the cause of the leaks and bleed the system.