Childproof Rear Door Lock Removal and Installation

Childproof Rear Door Lock Removal and Installation

Childproof Rear Door Lock Removal

1. Disconnect the negative battery cable.
2. Remove the door seal trim. Refer to Door Seal Trim Removal.




3. Remove the screw and the guide rail.
4. Remove the door lock screws.
5. Disconnect the lock rods.
6. Remove the door lock.




7. Disconnect the electrical connector.

Childproof Rear Door Lock Installation

1. Connect the electrical connector.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.




2. Install the rear door lock with the screws.

Tighten:
Tighten the rear door lock screws to 10 N.m (89 lb.in).

3. Install the lock rods.
4. Install the guide rail with the bolts and the screw.

Tighten:
Tighten the rear door guide rail screw to 4 N.m (35 lb.in).
Tighten the rear door guide rail bolts to 10 N.m (89 lb.in).

5. Install the door seal trim. Refer to Door Seal Trim Installation.




6. Connect the negative battery cable.