LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Verona L6-2.5L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Front Cross-Member >> Service and Repair >> Procedures >> Impact Beam Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Impact Beam Removal and Installation

Impact Beam

Removal
1. Remove the bolt of impact beam-to-radiator centermember.
2. Remove the bolts of impact beam-to-front suspension centermember.





3. Remove the impact beam.


Installation





1. Install the impact beam with bolts-to-radiator centermember and front suspension centermember.

Tighten: Tighten the bolts-to-radiator centermember and front suspension centermember to 100 Nm (74 ft. lbs.).
scientia non olet · About LEMON Manuals