Steering Wheel Removal

Tools Required 

1. KM-210-A Steering Wheel Puller

1. Disconnect the negative battery cable.
2. Remove the SIR module. Refer to DRIVER-SIDE AIR BAG MODULE .
3. Remove the steering wheel nut and the retaining clip.
Fig 1: Removing Steering Wheel Nut & Retaining Clip
Courtesy of SUZUKI OF AMERICA CORP.
4. Remove the steering wheel using the steering wheel puller KM-210-A.
   CAUTION: In order to install the steering wheel correctly, match-mark the steering column shaft to the steering wheel.
5. Unclip the contact ring from the steering wheel, if necessary.

Fig 2: Removing Clip Contact Ring From Steering Wheel

Courtesy of SUZUKI OF AMERICA CORP.