LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Verona EX >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater & Ventilation >> Repair Instructions >> Control Assembly Knob Lighting Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Assembly Knob Lighting Installation

  1. Install the bulb into the holder and turn the bulb to the right.
  2. Install the control assembly case halves.
    • Pass the connector for the vacuum switch through the hole in the rear assembly case part.
    • Be sure to align the flats on mating control shafts of the two case halves.
  3. Install the connector into the vacuum control switch.
    4. Fig 1: Installing Connector Into Vacuum Control Switch
    G01987361Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the control assembly. Refer to Control Assembly Removal  .
  5. Connect the negative battery cable.
  6. Check the knob light for proper operation.
Fig 2: Checking Knob Light For Proper Operation
G01987362Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals