Front Bucket Seat Installation (for Power Driver Seat)

1. Install the seat.
2. Connect the electrical connectors.
   CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
3. Install the bolts into the front portion of the front seat.
   1. Tighten the front seat-to-floor bolts to 25 N.m (18 lb-ft).
4. Install the plastic caps.
   Fig 1: Installing Plastic Caps

   Courtesy of SUZUKI OF AMERICA CORP.
5. Install the bolts into the rear portion of the front seat.
   1. Tighten the front seat-to-floor bolts to 25 N.m (18 lb-ft).
6. Install the plastic caps.
7. Connect the negative battery cable.

Fig 2: Installing Bolts In Rear Portion Of Front Seat

Courtesy of SUZUKI OF AMERICA CORP.