LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Verona EX >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Column >> Repair Instructions >> Steering Shaft Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Shaft Disassembly

  1. Position the upper shaft 90 degrees to the lower shaft and separate the two parts.
    CAUTION: Prior to separating the upper shaft from the lower shaft, note the relationship of the upper shaft, with the lock bolt slot at the 12 o'clock position, to the lower shaft pinch bolt groove at the 7 O'clock position. Refer to this orientation for proper assembly.
    2. Fig 1: Positioning Upper Shaft To Lower Shaft & Separating Two Parts
    G01987216Courtesy of SUZUKI OF AMERICA CORP.
  2. Rotate the centering sphere 90 degrees and remove it from the upper shaft.
    3. Fig 2: Rotating Centering Sphere & Removing From Upper Shaft
    G01987217Courtesy of SUZUKI OF AMERICA CORP.
  3. Separate the sphere halves and remove the joint preload spring.
Fig 3: Separating Sphere Halves & Removing Joint Preload Spring
G01987218Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals