LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Stabilizer Shaft-To-Knuckle Nut & Shaft-To-Link Nut
    GM1241958Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft into the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.

    Tighten:  Tighten the stabilizer shaft link nuts to 50 N.m (37 lb ft).

  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals