April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Valve, Pinion Assembly & Stub Shaft Housing

GM1248358

Courtesy of GENERAL MOTORS CORP.

Remove the tie rod.
Remove the rack bearing. Refer to Valve and Pinion Assembly Disassemble .

Fig 2: Pinion Shaft Ball Bearing

GM1248360

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Tap the shaft gently.

Remove the pinion shaft ball bearing.

Fig 3: Sir Clip & Rack Gear Housing

GM1248361

Courtesy of GENERAL MOTORS CORP.

Remove the sir clip from the rack gear housing.

Fig 4: Rack Gear & Stopper

GM1248362

Courtesy of GENERAL MOTORS CORP.

Remove the rack gear and stopper by pulling them.
Remove the rack gear stopper.