Removal Procedure

There is no provision for overhaul or disassembly of the rack and pinion power steering gear. The power steering gear is served only as an assembly.

Fig 1: Adjuster Plug Locknut From Adjuster Plug Using A Wrench
Courtesy of GENERAL MOTORS CORP.
1. Remove the rack and pinion steering assembly from the vehicle.
2. Remove the adjuster plug locknut from the adjuster plug, and remove the adjuster plug from the housing with the rack guide spring cap wrench (22 mm).
Fig 2: Adjusting Spring & Rack Bearing
Courtesy of GENERAL MOTORS CORP.
3. Remove the adjuster spring and rack bearing.