LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Hoses and Pipes Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Pressure Line Pipe, Supply Line Hose, Inlet/Outlet Connections & Power Steering Pump
    GM1251828Courtesy of GENERAL MOTORS CORP.
  1. Siphon the power steering fluid from the fluid reservoir.
  2. Disconnect the pressure line pipe and the supply line hose from the inlet and outlet connections on the power steering pump.
  3. Remove the air cleaner housing, if needed.
    4. Fig 2: Pressure Line, Return Line Hoses, Retaining Clips & Radiator
    GM1251829Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the pressure line and return line hoses from the retaining clips at the bottom and the side of the radiator.
    5. Fig 3: Pressure Line Inlet Pipe & Steering Gear
    GM1251830Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the pressure line inlet pipe from the steering gear.
    6. Fig 4: Power Steering Fluid & Fluid Reservoir
    GM1251824Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the supply line hose from the power steering fluid reservoir.
  7. Remove the power steering pump pressure line and return line.
scientia non olet · About LEMON Manuals