LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System >> Repair Instructions >> Steering Gear Component Inspection >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Rack/Pinion Steering Assembly
    GM1248353Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the pinion lock nut.

    Tighten:  Tighten the pinion lock nut to 30 N.m (22 Ib ft).

    2. Fig 2: Adjuster Plug Locknut From Adjuster Plug Using A Wrench
    GM1248351Courtesy of GENERAL MOTORS CORP.
  2. Install the adjust nut and its lock nut. Refer to Rack and Pinion Gear Rack Bearing Preload Adjustment - Off Vehicle .
    3. Fig 3: Tightening Tie Rod
    GM1248366Courtesy of GENERAL MOTORS CORP.
  3. Install the tie rod.

    Tighten:  Tighten the tie rod to 100 N.m (75 Ib ft).

scientia non olet · About LEMON Manuals